Renovation-Headquarters Banner

Make Your Heavy-Duty Machinery Run Like New with These Expert Tips

orange excavator

If there's one thing that's certain in terms of heavy-duty machinery, it's the fact that without these omnipotent pieces of equipment, a lot of industries wouldn't be able to normally function, particularly, agriculture, construction, and mining industries.

It's safe to say that these machines are an integral part of a lot of companies due to the fact that they are constantly employed in order to execute some very time-consuming and challenging tasks.

Therefore, it's of huge importance to ensure you are maintaining these heavy machines on a regular basis because that's one of the best ways to keep them "healthy". If you want to know what you can do to make sure they are as effective as they're supposed to be, then check out these tips below.

Consider Obtaining Rubber Track Pads

Although these machines are capable of executing very difficult and complex labor, the truth is, at times, the loud noise their make can be very loud and irritating. If you’re searching for a tool that’s going to reduce it, then maybe you should consider obtaining rubber tracks for excavators because they can help you accomplish that. This particularly refers to steel tracks.

Generally speaking, rubber tracks are designed to increase traction on relatively rough and harsh surfaces, and simultaneously, safeguard hard grounds like asphalt and concrete. With them, you'll have a much smoother ride, without worrying that you'll cause any damage.

Lubricant Replacements Must Be Done Regularly

You probably already know that every sort of heavy equipment relies on lubricants because it operates much better with their assistance. The whole point of lubricants is to lower friction around moving areas, which then reduces wear and tear.

Furthermore, with the help of lubricants, the interior of this equipment is going to be a lot cleaner because the lubricant is here to prevent soot pileup. So if you want your heavy-duty machinery to run like crazy, then be sure to do the following:

  • Don’t forget to check the lubricant level as often as you can. Apart from that, you should pay attention to the oil seal leaks and if the grease has piled up in the meantime.
  • If you’re planning on utilizing the lubricant, then make sure to employ the amount that’s prescribed in the manual or that has been advised to you by the manufacturer.
  • When it comes to the amount that's supposed to be employed, it should never be too little or too much. Keep in mind that if you overdo it, you'll increase the risk of grease build-up. On the other hand, if you use too little, you'll increase the chances of wear and tear and friction. So please, be careful!

Regular Check-Up Is Always Advisable

You know how crucial it is to have a regular check-up with your doctor (at least once per year), well that’s exactly what’s necessary for these machines too. By doing this, you'll know exactly if everything is okay in terms of functionality and condition and whether there are some issues that need to be fixed.

According to the Occupational Safety and Health Administration, roughly twenty percent of industrial incidents are related to maintenance operations and almost fifteen percent of them can cause life-threatening injuries to the employees. That's precisely one of the major reasons why you simply must take all the relevant measures to prevent these accidents. This way, you'll not only ensure that your heavy-duty machinery works properly but will also keep your workers safe.

Inspection For Wear And Damage Is Important Too!

Another thing that you should do is to regularly supervise and inspect your machinery equipment and to check the wear. Something like this is going to help you prevent some serious damage to your machines.

Not to mention that by doing so, you’ll be able to organize your budget the right way and prepare it for the necessary replacements. In these instances, it would be advisable to check the machine’s temperature, vibration, and friction.

The beat normally comes from gears and belts that aren't aligned correctly. Shock typically occurs when there's been some accident, while the high temperature may be caused by friction, small amounts of lubrication, and worn-out parts.

Make Sure To Have An Effective Response Team

If you're planning on having some major projects in the future, then it would be wise to organize a team for fast response repair, in case you need some spare parts or anything else that's essential.

CAT excavator working under a brige

There's no need to remind you how pivotal it is to keep your heavy-duty machinery in excellent shape. Only then, you'll be able to execute all these challenging tasks. So if you want them to stay effective, then implement everything that's been written here.